PG-FP5 CHAPTER 8 USAGE COMMUNICATION COMMANDS
R20UT0008EJ0400 Rev. 4.00 Page 180 of 240
Jul 15, 2010
8.5.14 scf command
Executes [Security] command.
Input format
'scf'
Description of the function
Executes a similar function to the programming GUI [Device] menu -> [Security] command.
Example of usage
Command Status Status LED Message display Screen output
Display while executing the command BUSY Set Security Fla Set Security Flags
Display after executing the command
[When completed normally]
PASS
Returns to the display
before executing the
command.
PASS
Security operation finished.
scf
Display after executing the command
[When terminated abnormally]
ERROR
ERROR: xxx
xxxxxxxxxxxxxxxx
ERROR(Exxx): <text>
To Next Page
Loading...
