PG-FP5 CHAPTER 2 HARDWARE CONFIGURATION
R20UT0008EJ0400 Rev. 4.00 Page 20 of 240
Jul 15, 2010
CHAPTER 2 HARDWARE CONFIGURATION
This chapter explains the following items for hardware configuration.
• Package contents
• System configuration
• Names and functions on main unit
2.1 Package Contents
Please verify that you have received all the parts listed in the package contents list included with the FP5 package. If
any part is missing or seems to be damaged, please contact a Renesas Electronics sales representative or distributor.
2.2 System Configuration
The FP5 system configuration is as shown in the diagram below.
Figure 2-1. FP5 System Configuration
Notes 1. The target system and program adapter are not included in the FP5 package.
2. The program adapter is a product of Naito Densei Machida Mfg. Co., Ltd.
The FP5 is connected to the host machine via a serial cable or a USB cable. The FP5 is connected to the target
system via a target cable and a GND cable. And the FP5 can be remote controlled by connecting the remote connector
and external control device.
Target cable
Serial cable
AC adapter
GND cable
Target system or Program adapter
USB cable
Host machine
FP5
or
External control
devices
To Next Page
Loading...
Need help?
General
