Renesas PG-FP5 User Manual

PG-FP5 CHAPTER 4 PROGRAMMING GUI USAGE
R20UT0008EJ0400 Rev. 4.00 Page 45 of 240
Jul 15, 2010
4.3 Menu Bar
The menu bar displays the commands that are available for the programming GUI. Some commands may be
unavailable when the programming GUI is started for the first time, depending on the parameter file (PR5 file) selected or
FP5 Manager setting. Also, if an HCUHEX file is selected, the HCUHEX file is handled as master data, so the [P
rogram],
[R
ead], [Set Security], [Set Option bytes], and [Set OCD Security ID] commands are unavailable.
Caution During command execution, do not execute other commands or terminate the programming GUI.
4.3.1 [F
ile] menu
The following pull-down menu appears by clicking the [File] menu.
This menu includes commands related to program file operation.
Figure 4-5. [F
ile] Menu
(
1
)
(
2
)
(
3
)
(
4
)

Renesas PG-FP5 Specifications

General

Brand	Renesas
Model	PG-FP5
Category	Motherboard
Language	English