PG-FP5 CHAPTER 8 USAGE COMMUNICATION COMMANDS
R20UT0008EJ0400 Rev. 4.00 Page 181 of 240
Jul 15, 2010
8.5.15 sig command
Executes [Signature read] command.
Input format
'sig'
Description of the function
Executes a similar function to the programming GUI [Device] menu -> [Signature read] command.
Example of usage
Command Status Status LED Message display Screen output
Display while executing the command BUSY Signature:
<Display example>
Device name: Dxxxxxxxxx
Device data: xx xx xx xx
Device end addr: xxxxxxxx
Security Flag: xxxx
Boot Block Number: xxxx
Device Version: x.xx
Firmware Version: x.xx
Display after executing the command
[When completed normally]
PASS
Returns to the display
before executing the
command.
PASS
Signature operation finished.
sig
Display after executing the command
[When terminated abnormally]
ERROR
ERROR: xxx
xxxxxxxxxxxxxxxx
ERROR(Exxx): <text>
To Next Page
Loading...
