PG-FP5 CHAPTER 3 SOFTWARE INSTALLATION
R20UT0008EJ0400 Rev. 4.00 Page 33 of 240
Jul 15, 2010
3.4.3 Installation of firmware update
Install the latest firmware by using the latest programming GUI. Decompress the file to any folder. The firmware file
“fp5_fw_vxxx.rec” will be decompressed to the selected folder. (“xxx” indicates the firmware version.)
(1) Click the [Programmer] menu on the menu bar and select [Update Firmware]; the [Update Firmware] dialog box will
then be opened.
Figure 3-6. [U
pdate Firmware] Command
Figure 3-7. [Update Firmware] Dialog Box
To Next Page
Loading...
