PG-FP5 CHAPTER 8 USAGE COMMUNICATION COMMANDS
R20UT0008EJ0400 Rev. 4.00 Page 176 of 240
Jul 15, 2010
8.5.10 idc command
Executes the [Set OCD Security ID] command.
Input format
'idc'
Description of the function
Obtains the information set by executing the [Set OCD Security ID] command on the [Device] menu of the programming
GUI.
Example of usage
Command Status Status LED Message display Screen output
Display after executing the command
[When completed normally]
PASS
Returns to the display
before executing the
command.
[Display example]
Set OCD-ID
PASS
OCD-ID operation finished.
idc
Display after executing the command
[When terminated abnormally]
ERROR
ERROR: xxx
xxxxxxxxxxxxxxxx
ERROR(Exxx): <text>
To Next Page
Loading...
