PG-FP5 CHAPTER 8 USAGE COMMUNICATION COMMANDS
R20UT0008EJ0400 Rev. 4.00 Page 170 of 240
Jul 15, 2010
8.5.4 ep/epv command
Executes [Autoprocedure(E.P.)] command.
Input format
'ep' or 'epv'
Description of the function
Executes a similar function to the programming GUI [Device] menu -> [Autoprocedure(E.P.)] command.
Example of usage
Command Status Status LED Message display Screen output
Display while executing the command BUSY See below.
Display after executing the command
[When completed normally]
PASS
Returns to the display
before executing the
command.
PASS
Erase,Program operation finished.
or
PASS
EPV operation finished.
ep
or
epv
Display after executing the command
[When terminated abnormally]
ERROR
ERROR: xxx
xxxxxxxxxxxxxxxx
ERROR(Exxx): <text>
Erase,Program operation finished.
or
ERROR(Exxx): <text>
EPV operation finished.
[Display example]
Blank check Skipped.
Erase Chip:
PASS
Program Chip:
10%
20%
:
100%
To Next Page
Loading...
