PG-FP5 APPENDIX C ELECTRICAL SPECIFICATIONS OF TARGET INTERFACE
R20UT0008EJ0400 Rev. 4.00 Page 221 of 240
Jul 15, 2010
(2/2)
Pin name Symbol Parameter or Conditions MIN. TYP. MAX. Unit
tPLHRS Rise time (C = 0 pF) 20 ns RESET
t
DRS Reset release maximum delay time Note ns
Note (tRPE−tRP) / 2 − FLMD0 × 100
μ
s
tRP : Device firmware FLMD0 Count start time
t
RPE : Device firmware FLMD0 Count finish time
The maximum number of FLMD pulses is 15.
For the characteristics of t
RP, tRPE, and FLMD0 pulses, refer to the parameter specifications in the manual of the
target manual.
tDRS
RESET
VDD
FLMD0
tRP
tRPE
tPLHRS
0.8 x V
DD
To Next Page
Loading...
