RGB Spectrum QuadView UHDx User Manual

350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide 3
C H A P T E R 1
I n t r o d u c t i o n
RGB
 Scales input signals for output to a UHD or Full HD display.
 Automatically scales source inputs to destination windows.
 Provides fast input switching.
1.1.3 Control
 Easy-to-use front panel controls.
 QuadView UHDx Web Controller, a simple and intuitive web-based interface.
 Command-line interface (CLI) via RS-232 serial or Telnet connection.
 Support for third-party control systems.
The RS-232 serial port and Ethernet port provide system control for the QuadView UHDx.
 The RS-232 serial port connects to:
 An ASCII terminal.
 Any computer with a serial port.
 A third-party control system.
Commands are sent from the terminal or computer to the QuadView UHDx.
 The Ethernet port allows you to connect the QuadView UHDx to either:
 A network.
 Directly to a PC.
This connection allows you control the system using either a Telnet command-line session or
the QuadView UHDx Web Controller.
1.2 System Control
N o t e
USB-to-serial converters are inexpensive and widely available. If needed, use one to
connect your USB-equipped computer to the QuadView UHDx serial port.
N o t e
Refer to “Command Line Control” on page 41, for detailed instructions for setting
up and using the command-line interface.

RGB Spectrum QuadView UHDx Specifications

General

Brand	RGB Spectrum
Model	QuadView UHDx
Category	Monitor
Language	English