350-12245-01 – updated December, 2019 QuadView UHDx/UHDx KVM User Guide 55
C H A P T E R 5
F i r mw a r e U p d a t e s
RGB Spectrum periodically updates product firmware to add new features or improve product
performance. To check for firmware updates for your RGB Spectrum product:
1. Visit the Partner Portal section of our web site at http://www.rgb.com/partners/.
2. Either:
Click the Login button to access the portal with an existing username and password.
Create a new account by clicking the Register button and then following the on-screen
instructions.
3. After logging in to the portal, select Product Firmware.
4. To determine your current firmware version number, either:
Select the Update tab of the QuadView UHDx Web Controller, and then read the
Firmware Version and WebGUI Version (Web Controller version) that appear at the top
of the tab).
Send the ASCII command ATM 08 CSW_VER R from a PC or other controller via the LAN
or RS-232 interface.
You can use any of the following methods to update the QuadView UHDx firmware:
Web Controller: See “Web Controller” on page 56.
Command line: See “Command Line” on page 56.
front panel controls: See “Front Panel” on page 57.
CHAPTER
5
FIRMWARE
UPDATES
To Next Page
Loading...
Need help?
General