C H A P T E R 4
C o m m a n d L i n e C o n t r o l
46 QuadView UHDx/UHDx KVM User Guide 350-12245-01 – updated December, 2019
Set Output Timing
(cont.)
ATM 0A OPT_TIM W 14 ~0A OPT_TIM W 14 Sets the HDMI output resolution
to 1280 × 1024@60Hz (SXGA).
ATM 0A OPT_TIM W 15 ~0A OPT_TIM W 15 Sets the HDMI output resolution
to 1280 × 720@60Hz (720P).
ATM 0A OPT_TIM W 16 ~0A OPT_TIM W 16 Sets the HDMI output resolution
to 1280 × 800@60Hz_RB.
ATM 0A OPT_TIM W 17 ~0A OPT_TIM W 17 Sets the HDMI output resolution
to 1280 × 768@60Hz.
ATM 0A OPT_TIM W 18 ~0A OPT_TIM W 18 Sets the HDMI output resolution
to 1280 × 720@50Hz.
ATM 0A OPT_TIM W 19 ~0A OPT_TIM W 19 Sets the HDMI output resolution
to 1024 × 768@60Hz (XGA).
ATM 0A OPT_TIM W 20 ~0A OPT_TIM W 20 Sets the HDMI output resolution
to 800 × 600@60Hz.
Input Cropping ATM 0A CRO_PIN R C
[1...6]
~CRO_PIN R C [0 | 1] Reports if cropping Input [1...6]
is enabled (1) or disabled (0).
Example: Crop Input 3 disabled
ATM 0A CRO_PIN R C 3
~CRO_PIN R C 0
ATM 0B CRO_PIN W C
[1...6] [0 | 1]
~0B CRO_PIN W C [1...6]
[0 | 1]
Enables (1) or disables (0)
cropping on Input [1...6].
ATM 0A CRO_PIN R X
[1...6]
~CRO_PIN R
Xxxxx,Yyyyy,Wwwww,
Hhhhh
Reports position (X/Y) and size
(W/H) of visible region of Input
[1...6] source.
Example: Input 4 cropped to
800 × 600 with origin at 100, 100
ATM 0A CRO_PIN R X 4
~CRO_PIN R
X0100,Y0100,W0800,
H0600
ATM 20 CRO_PIN W [1...6]
Xxxxx,Yyyyy,Wwwww,
Hhhhh
~20 CRO_PIN W [1...6]
Xxxxx,Yyyyy,Wwwww,
Hhhhh
Sets crop area (source
rectangle) for Input [1...6] to
wwww × hhhh, with origin at
xxxx, yyyy.
Example: Crop Input 4 to 800 ×
600 with origin at 100, 100
ATM 20 CRO_PIN W 4
X0100,Y0100,W0800,
H0600
~20 CRO_PIN W 4
X0100,Y0100,W0800,
H0600
Table 4-1 General Commands (Continued)
Function Command Feedback Description
To Next Page
Loading...
Need help?
General