Ricoh 150 - Page 147

When You Cannot Use the Machine As You Want
145
8
Problem
Possible cause
Solutions
The screen is switching.
Due to the properties of the
OLED panel, the screen displays
completely dark at the timing
when the black screen is
displayed.
Check the power status of this
machine with the power LED.
page 13 "Component Names
and Functions"
An image has noise
(when wired
connection is used).
The USB Type-C cable is not
properly connected.
Reconnect the USB Type-C
cable.
A problem with USB Type-C
cable.
Replace the USB Type-C cable.
The connected device is
outputting abnormal data.
Connect other devices and check
if the same problem occurs.
A resolution not supported
by this machine has been
input.
Check whether the output
resolution of the device is
supported by this machine.
page 167 "Specifications"
There is a device generating
noise in the surroundings.
Change the location of use and
check if the problem improves.
An image has noise
(when wireless
connection is used).
The connected device is
outputting abnormal data.
Connect other devices and check
if the same problem occurs.
A resolution not supported
by this machine has been
input.
Check whether the output
resolution of the device is
supported by this machine.
page 167 "Specifications"
There is a device generating
noise in the surroundings.
Change the location of use and
check if the problem improves.
The network signal condition
is poor.
Check the network status and
reconnect.
This machine is generating
heat due to charging of the
battery.
Stop charging this machine or
use it after charging is complete.