2. Remove the adhesive tape from the paper feed unit.
3. Turn off the main power switch, and then unplug the machine's power cord from the wall
outlet.
4. Lift the machine by the inset grips on its sides.
At least four people are needed to lift the machine.
When moving the machine, do not hold on the following parts as doing so could cause a
malfunction:
• The handle onto the standard paper feed tray.
• The underside of the bypass tray.
5. There are four upright pins on the paper feed unit. Align them with the holes on the
underside of the machine, and then carefully lower the machine.
When installing two or more units, first connect the units together, and then attach them as a single
unit to the machine.
6. After installing the paper feed unit, check the paper tray on the display.
• If the paper feed unit is not installed properly, reinstall it following this procedure. If you cannot
install it properly even after attempting reinstallation, contact your sales or service representative.
4. Installing Options
106
To Next Page
Loading...
