Ricoh Aficio SP 5200S - Connecting a Device to the Machines USB Host Interface

Caution:
Properly shield twisted pair cable (STP cable) must be used for connections to a host computer
(and/or peripheral) in order to meet emission limits.
1. Connect the USB2.0 (Type B) interface cable to the USB2.0 port.
CFL009
2. Connect the other end to the USB2.0 port on the host computer.
• This machine does not come with a USB interface cable. Make sure you purchase the appropriate
cable for the machine and your computer.
• The USB2.0 interface board is supported by Windows XP/Vista/7, Windows Server 2003/2003
R2/2008/2008 R2, Mac OS X 10.3.3 or higher.
• When used with Mac OS X 10.3.3 or higher, a transfer speed of USB2.0 is supported.
• For details about installing the printer driver, see "Preparing the Machine", Printer Reference.
Connecting a Device to the Machine's USB Host Interface
This section explains how to connect a device to the machine's USB host interface.
1. Connect one end of the USB interface cable to the machine's USB host interface.
CFL010
3. Getting Started
92