Ricoh Aficio SP 5200S - Installing the Wireless LAN Interface Board

CFE039
• Confirm that the Gigabit Ethernet board was correctly installed by printing the configuration page.
If it is correctly installed, “Gigabit Ethernet Board” will appear for “Device Connection” on the
configuration page. For details about printing the configuration page, see “Interface Settings”,
Network and System Settings Reference.
• If the board was not installed properly, repeat the procedure from step 4. If it cannot be installed
correctly even after reattempting installation, contact your sales or service representative.
• For details about how to connect the Ethernet interface cable to the Gigabit Ethernet port, see
“Connecting to the Gigabit Ethernet Interface”, Network and System Settings Reference.
Installing the Wireless LAN Interface Board
This section describes how to install the wireless LAN interface board.
1. Check the contents of the package.
CFE040
1
2
3
1. Wireless LAN board
Installing the Board (Optional)
113