Ricoh Aficio SP 5200S - Changing the Paper Size; Changing the Paper Size in Trays 1 - 4

Changing the Paper Size
This section describes how to change the paper size.
• When loading paper, take care not to trap or injure your fingers.
• Do not stack paper over the limit mark.
• Straighten curled or warped paper before loading.
• For details about paper sizes and types, see “Recommended Paper Sizes and Types”.
• page 136 "Recommended Paper Sizes and Types"
Changing the Paper Size in Trays 1 - 4
This section describes how to change the paper size in trays 1 4.
The paper size setting is changed in the same way for trays 1 4.
In the following example procedure, the paper size setting for tray 1 is changed.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• During copying or printing, do not open or close the covers or bypass tray, or pull out or push in
the paper tray.
Various sizes of paper can be loaded in trays 1 4 by adjusting the positions of the side fences and end
fence.
Changing the Paper Size
125