• If the board was not installed properly, repeat the procedure from step 4. If it cannot be installed
correctly even after reattempting installation, contact your sales or service representative.
• For details about how to connect the Ethernet interface cable to the Gigabit Ethernet port, see
“Connecting to the Gigabit Ethernet Interface”, Network and System Settings Reference.
Installing the Gigabit Ethernet Board (mainly North America)
This section describes how to install the Gigabit Ethernet board.
• The machine's Ethernet and USB ports are not available when the Gigabit Ethernet board is
installed into the machine. Use the Ethernet and USB ports on the Gigabit Ethernet board.
1. Check the contents of the package.
1. Gigabit Ethernet board
2. Protective caps (one each for the Ethernet port and the USB port)
2. Turn off the main power switch, and then unplug the machine's power cord from the wall
outlet.
Installing the Board (Optional)
111
To Next Page
Loading...
