Installing the SD Card (Optional)
This section describes how to install the optional SD card.
• Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside
this machine are high voltage components that are an electric shock hazard and laser
components that could cause blindness. Contact your sales or service representative if any of the
machine's internal components require maintenance, adjustment, or repair.
• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
Note again that exposure to the laser components inside this machine risks blindness.
• Keep SD cards out of reach of children. If a child swallows an SD card, consult a doctor
immediately.
• Do not subject the card to physical shocks.
• If you want to use two or more SD cards that can be inserted in the same slot, contact your sales
and service representative.
1. Check the contents of the package.
2. Turn off the main power switch, and then unplug the machine's power cord from the wall
outlet.
4. Installing Options
118
To Next Page
Loading...
