• For details about various details about and recommendations concerning envelopes, see
“Envelopes”.
• If you load a paper size that is not selected automatically, you will need to specify the paper size
with the control panel. For details, see “Changing to a Size That Is Not Automatically Detected”.
• To load 8
1
/
2
× 13 or 8
1
/
2
× 14 , extend the tray.
• Be sure to select the paper type with System Settings. If you do not, misfeeds might occur. For
details about Paper Type, see “Tray Paper Settings”, Network and System Settings Reference.
• page 130 "Changing to a Size That Is Not Automatically Detected"
• page 141 "Envelopes"
Changing to 8
1
/
2
× 13 or 8
1
/
2
× 14 size paper
When loading 8
1
/
2
× 13 or 8
1
/
2
× 14 size paper in trays 1 4, extend the tray as follows.
1. Lift and pull tray 1 carefully, and then pull it out with both hands.
Place the tray on a flat surface.
2. Slide the catches inwards to unlock the tray.
3. Slide the tray until it stops.
Changing the Paper Size
129
To Next Page
Loading...
