This switch turns off the main power to the machine and causes the main power indicator on
the right side of the control panel go off. When your machine is type 2, or types 1 and 3 with
the optional fax unit installed, fax files in the memory may be lost if you turn this switch off. Use
this switch only when necessary.
• This machine automatically enters Energy Saver mode or turns itself off if you do not use it for a
while. To specify the time that the machine waits before it enters Energy Saver mode and/or turns
itself off, configure the Energy Saver Timer and/or Auto Off Timer setting, respectively. See
“System Settings”, Network and System Settings Reference.
Turning On the Main Power
This section explains how to turn on the main power.
• Do not use any power sources other than those that match the specifications shown in this
manual. Doing so could result in fire or electric shock.
• Do not use any frequencies other than those that match the specifications shown. Doing so could
result in fire or electric shock.
• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.
• Do not use extension cords. Doing so could result in fire or electric shock.
• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords
that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.
• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and
electric shock hazard.
• The supplied power cord is for use with this machine only. Do not use it with other appliances.
Doing so could result in fire or electric shock.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs
create an unstable connection that can result in unsafe buildup of heat.
Installing the Machine
75
To Next Page
Loading...
