*1
Simultaneous operations are only possible after the preceding job documents are all scanned and [New Job]
appears.
*2
You can scan a document after the preceding job documents are all scanned.
*3
Operation is possible when extra lines are added.
*4
During stapling, printing automatically starts after the current job.
*5
Stapling is not available.
*6
Simultaneous operation becomes possible after you press [New Job].
*7
During parallel reception, any subsequent job is suspended until the reception is completed.
• Stapling cannot be simultaneously used for multiple functions.
• The bypass tray cannot be simultaneously used for multiple functions. Also, you cannot
simultaneously print documents using the printer function and print from the bypass tray using
Installing the Machine
85
To Next Page
Loading...
