SCANNER ACCESSIBILITY OPTION (B815)
B264/B265 1-80 SM
Connect the Long Scanner Cable to the Copier
1. Position the cable [A] and ground wire [B] of the long scanner I/F cable as
shown.
2. Reattach the long scanner I/F connectors [C] and ground wire [D] (x2)
• Make sure the ground wire and cable loop behind the large boss.
3. Reattach (Pg. 72)
• Original length sensor ( x1).
• Lens block assembly ( x4).
• Lens block cover ( x4)
4. Set the collar [E] of the long scanner I/F cable in the bracket and clamp the
cable (x1)
5. Reinstall rear bracket [F] ( x5, x2).
6. Pull the ferrite core [G] slightly away from the back of the machine.
7. Reattach: (Pg. 72)
• Scanner rear cover ( x2)
• Rear scale ( x3)
• Exposure glass and left scale ( x2)
B815I106.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
To Next Page
Loading...
