SCANNER ACCESSIBILITY OPTION (B815)
SM 1-81 B264/B265
Installation
Install Anti-Static Springs on Operation Panel
1. Remove the screws holding the operation panel [A] ( x2. )
2. Pull the operation panel away from the copier (do not disconnect or remove)
and turn it over.
3. Peel the covers from an anti-static springs [B] and attach them as shown.
4. Press down gently on each spring to confirm that each spring is attached
securely.
5. Reattach the operation panel to the machine ( x2).
B815I107.WMF
[A]
[B]
To Next Page
Loading...
