Ricoh B264 - Page 785

SERVICE PROGRAM MODE
SM 33 B779
Fax Option
B779
3
Mode No. Function
003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, turn this SP on.
PSTN-2 Port Settings
001 Select Line
Select the line setting for the G3-2 line. If
the machine is installed on a PABX line,
select “PABX”, “PABX(GND)” or
“PABX(FLASH)”.
002 PSTN Access Number
Enter the PSTN access number for the G3-
2 line.
003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, change this SP to on.
104
004
Transmission
Disabled
If you turn this SP on, the machine does not
send any fax messages on the G3-2 line.
PSTN-3 Port Settings
001 Select Line
Select the line setting for the G3-3 line. If
the machine is installed on a PABX line,
select “PABX”, “PABX(GND)” or
“PABX(FLASH)”.
002 PSTN Access Number
Enter the PSTN access number for the G3-
3 line.
003
Memory Lock
Disabled
If the customer does not want to receive
transmissions using Memory Lock on this
line, change this SP to on.
105
004
Transmission
Disabled
If you turn this SP on, the machine does not
send any fax messages on the G3-3 line.
ISDN Port Settings
001 Select Line
002 PSTN Access Number
003
Memory Lock
Disabled
106
004
Transmission
Disabled
Not used (Do not change the bit switches)
IPFAX Port Settings
001 H323 Port
002 SIP Port
003 RAS Port
004 Gatekeeper port
005 T.38 Port
006 SIP Server Port
107
007
IPFAX Protocol
Priority
Select "H323" or "SIP".
FAX SW 201
001 – 032 00 – 1F