Ricoh D127 - Bypass Paper End Sensor

3. Open the paper guide [A].
• Remove the paper guide (Clip x 1) if you have difficulty removing the registration sensor.
4.
Registration sensor feeler [B]
5. Registration sensor [C] (
x 1)
• Disconnect the connector (CN127 [D]) if you have difficulty removing the registration sensor.
Bypass Paper End Sensor
1. Right door ( p.81 "Right Door")
2.
Sensor compartment [A]
3. Bypass paper end sensor [B] (
x 1)
• If it is difficult to reattach the Sensor compartment, turn the feed roller housing upside down.
(Bypass Feed Roller: Procedure 2)
Paper Feed
99