Ricoh D127 - Sp2-XXX (Ram); SP3-XXX (Machine Set)

SP2-XXX (RAM)
2 Mode No. Function
101
RAM Read/Write
001 - Change RAM data for the fax board directly.
102
Memory Dump
001 G3-1 Memory Dump Print out RAM data for the fax board.
103
G3-1 NCU Parameters
001 – 023 CC, 01 – 22
NCU parameter settings for the standard G3 board.
(
"p.245 "NCU Parameters"")
SP3-XXX (Machine Set)
3 Mode No. Function
101
Service Station
001 Fax Number Enter the fax number of the service station.
102
Serial Number
000 - Enter the fax unit’s serial number.
103
PSTN-1
001 Select Line
Select the line type setting for the G3-1 line. If the
machine is installed on a PABX line, select “PABX”,
“PABX(GND)” or “PABX(FLASH)”.
002
PSTN Access
Number
Enter the PSTN access number for the
G3-1 line.
003
Memory Lock
Disabled
If the customer does not want to receive transmissions
using Memory Lock on this line, turn this SP on.
5. Appendix: Fax Service Program
188