Ricoh D127 - Output Check (SP5-804); Conducting Output Check; Output Check Table

Num. Sensor/Switch Bit2 Bit1 Bit0
042 BCU Version Ver.1 Ver.2 Ver.3
Output Check (SP5-804)
Conducting Output Check
• To prevent mechanical or electrical damage, do not keep an electrical component on for a long
time.
1.
Select SP5-804.
2. Select the number (see the table below) corresponding to the component.
3. Select "ON."
4. To stop the operation, select "OFF."
Output Check Table
Num. Component
001 Main Motor: CW: High
003 Main Motor: CCW: High
020 Toner Bottle Motor
025 Exhaust Fan Motor: High
026 Exhaust Fan Motor: Low
028 CTL Fan
032 Registration CL
033 1st Paper Feed CL
040 Fusing SOL
041 Dehumidification Heater
042 P.P.: Image Transfer: -
System Service Mode
147