Ricoh D127 - Grounding Wire; HDD Option (D659); Component Check

Grounding Wire
Attach the grounding wire as shown.
[A] and [B] are attached with screws (thick) for the grounding wire.
[C] and [D] are with screws for the controller board cover.
• Be sure to make [A], [B] and [C] attached in upward direction.
HDD Option (D659)
Component Check
No. Description Q'ty
1 HDD Unit 1
2 Screw 6
3 SAT Interface Board 1
4 Cable (Small) 1
5 Cable (Large) 1
2. Installation
66
RTB 27
Jumper setting for Brazil