No. Description Q'ty
1 Wireless Adapter 1
2 Wireless LAN Card 1
3 LAN Card Cover 1
4 Caution Sheet 1
5 Label 1
Installation Procedure
1. Remove the interface cover [A] ( x 2).
2.
Install the Wireless adaptor into I/F slot [B] (
x 2).
3.
Install the Wireless LAN card in the wireless adaptor.
4. Attach the antenna cap to the wireless LAN card.
5. Turn on the main power switch.
6. Print out the configuration page (User Tools/Counter > Printer Features > List/Test Print), and then
check that this device is detected.
If reception is poor, you may need to move the machine:
• Make sure that the machine is not located near an appliance or any type of equipment that could
generate a strong magnetic field.
• Position the machine as close as possible to the access point.
Controller Options
59
To Next Page
Loading...
