• The 750-mm front space indicated above is sufficient to allow the paper tray to be pulled out.
Additional space is required to allow an operator to stand at the front of the machine.
•
Actual minimum space requirement for left, rear, and right sides is 10mm (0.4") each, but note that
this will not allow room for opening of the bypass tray, right door or ARDF unit.
Power Requirements
• Make sure that the wall outlet is near the machine and easily accessible. After completing
installation, make sure the plug fits firmly into the outlet.
•
Avoid multiple connections to the same power outlet.
• Be sure to ground the machine.
Input voltage:
North America: 120 – 127 V, 60 Hz, 15 A
Europe: 220 – 240 V, 50/60 Hz, 10 A
Image quality guaranteed at rated voltage ± 10%.
Operation guaranteed at rated voltage ± 15%.
2. Installation
30
To Next Page
Loading...
