Installation Procedure
1. Remove the interface cover [A] ( x 2).
2.
Install the IEEE 1284 board into I/F slot [B] (
x 2).
3.
Turn on the main power switch.
4. Print out the configuration page (User Tools/Counter > Printer Features > List/Test Print), and then
check that this device is detected.
VM Card Type S (D656)
Accessories
Check the accessories and their quantities against the table below.Accessories
No. Description Q'ty
1 VM SD Card 1
2 Decal 1
Controller Options
61
To Next Page
Loading...
