Ricoh D127 - Installation Procedure (for Two of PTU Installed Machine)

31. Remove the drawer from the paper tray unit.
32. Attach the caution decal [25] in the bottom of the paper tray unit.
33. Reassemble the copier.
34. Plug in the power cord, and check the operation.
Installation Procedure (For two of PTU installed machine)
• Unplug the main machine's power cord before starting the following procedure.
1. Remove the upper and the lower paper tray unit from the copier if it is already installed.
2. Remove the rear cover [1] from two of the paper tray units ( x 4).
Paper Tray Unit Heater
49