Ricoh D127 - SP5-XXX (Mode)

SP5-XXX (Mode)
5024* mm/inch Display Selection
001
Selects whether mm or inches are used in the display.
• After selecting the number, you must turn the main power switch off and on.
Europe/Asia model: [0: mm / 1: inch]
American model: [0: mm / 1: inch]
5045* Accounting Counter
5045 1 Counter Method
Displays the number of the installed counter.
[0 to 2 / 0 / 1 /step]
0: 1 counter (Total)
1: 2 counters (Total and Prints)
2: 2 counters GPC
5047* Paper Display
001
Backing Paper [0: OFF 1: ON]
Sets the “backing paper” button display ON/OFF on paper size selection.
5055 Display IP address
001 Display IP address CTL
Displays or does not display the IP address on the
LCD.
[0 or 1 / 0 / -]
0: No (Not display), 1: Yes (Display)
5062 Part Replacement Alert Display
001 DCDU: Bk CTL
Displays or does not display the PCU yield on the
LCD.
[0 or 1 / 0 / -]
0: Not display, 1: Display
System Service Mode
55