Ricoh D127 - System Maintenance Reference; Service Program; SP Tables; Using SP and SSP Modes

5. System Maintenance Reference
Service Program
• Do not let the user access the SP mode or the SSP mode. Only service representatives are allowed
to access these modes. The machine operation is NOT guaranteed after any person other than
service representatives accesses the SP mode.
SP Tables
See "Appendices" for the following information:
• System SP Tables
• Printer SP Tables
• Scanner SP Tables
Using SP and SSP Modes
The following two modes are available:
• SP Mode (Service Program Mode): The SP Mode includes the programs that are necessary for
standard maintenance work.
• SSP Mode (Special SP Mode): The SSP Mode includes SP-Mode programs and some special
programs. You need some extra knowledge to use these special programs. For details, consult your
supervisor.
141