Ricoh D127 - Printer Switches

Printer Switches
Printer Switch 00 [SP No. 1-103-001]
No FUNCTION COMMENTS
0
Select page separation marks
0: Off
1: On
0: If a 2 page RX transmission is split, [*] is printed in the
bottom right corner of the 1st page and only a [2] is
printed in the upper right corner of the 2nd page.
1: If a 2 page RX transmission is split into two pages, for
example, [*] [2] is printed in the bottom right corner of
the 1st page and only a [2] is printed in the upper right
corner of the 2nd page.
• This helps the user to identify pages that have been
split because the size of the paper is smaller than the
size of the document received. (When A5 is used to
print an A4 size document, for example.)
1
Repetition of data when the
received page is longer than the
printer paper
0: Off
1: On
1: Default. 10 mm of the trailing edge of the previous
page are repeated at the top of the next page.
0: The next page continues from where the previous page
stopped without any repeated text.
2
Prints the date and time on
received fax messages
0: Disabled
1: Enabled
This switch is only effective when user parameter 02 - bit
2 (printing the received date and time on received fax
messages) is enabled.
1: The machine prints the received and printed date and
time at the bottom of each received page.
3-7 Not used Do not change the settings.
Printer Switch 01 - Not used (do not change the settings) [SP No. 1-103-002]
Printer Switch 02 [SP No. 1-103-003]
No FUNCTION COMMENTS
5. Appendix: Fax Service Program
212