Thermoswitches and Thermistor
1. Hot roller assembly ( p.88 "Hot Roller and Fusing Lamp")
2.
Thermoswitches [A] (
x 2 )
3.
Thermistor [B] (
x 1)
Reassembling
Make sure of the following:
•
That the thermistor is in contact with the hot roller.
• That the hot roller turns smoothly.
• Do not recycle a thermoswitch that is already opened. Safety is not guaranteed if you do this.
4. Replacement and Adjustment
90
To Next Page
Loading...
