Ricoh D127 - Page 91

1. Hot roller stripper pawls and spacers ( p.87 "Hot Roller Stripper Pawls")
2.
Hot roller assembly [A] (
x 2)
3.
Fusing lamp [B]
• When reassembling, check that the direction of the fusing lamp is correct.
4. Hot roller [C] (2 C-rings, 1 spacer, 1 gear, 2 bushings, 1 cover [D])
Reassembling
Be sure that:
•
The fusing lamp is positioned correctly.
• The fusing lamp does not touch the internal part of the hot roller.
Fusing
89