Ricoh D127 - ID Sensor and Duplex Roller

ID Sensor and Duplex Roller
1. Right door ( p.81 "Right Door")
2.
Remove the lower guide [A] by releasing the hook to lift one side of the lower guide [A] as the red
arrow shows then lift the other side.
3. Idle roller holders [B].
4. Idle roller [C]
5. Roller guide [D] (
x 2)
6. Transfer unit [F] ( x 2)
• To remove the transfer unit easily, insert a slotted screwdriver into the one side of the unit as the red
arrow shows and lift to release. Then release the other side.
4. Replacement and Adjustment
104