Ricoh D127 - Page 173

No.
Definition
Symptom Possible Cause/Countermeasure
-002 B
Administration server error
NOT found the tracking information.
• Defective tracking administration
server
•
Defective tracking SDK APP
• Defective Network
1. Power source OFF/ON
640 D
Engine to controller communication error (Check Sum error)
Incorrect sum data. • Defective the PCI related hardware
641 B
Engine to controller communication error (No response)
No response to the frame from the
engine when frame sending according
to RAPI protocol is done from the
controller.
650 Communication error of the remote service modem (Cumin-M)
-001 C
Authentication error
The authentication for the Embedded
RCG-M fails at a dial up connection.
1. Check and set the correct user name
(SP5816-156) and password
(SP5816-157).
-004 C
Incorrect modem setting
Dial up fails due to the incorrect modem
setting.
1. Check and set the correct AT
command (SP5819-160).
-005 C
Communication line error
The supplied voltage is not sufficient due
to the defective communication line or
defective connection.
1. Consult with the user's local
telephone company.
651
Incorrect dial up connection
An unexpected error occurs when the modem (RCG-M) tries to call the center with a dial up
connection.
SC Tables
171