001
System Log Disp
Determines whether an error code appears in the system log after a user authentication
failure occurs.
[0 to 1/0/1]
0: Off
1: On
002
Panel Disp
Determines whether an error code appears on the operation panel after a user
authentication failure occurs.
[0 to 1/1/1]
1: On
0: Off
5507 Supply Alarm CTL -
080 Toner Call Timing
0: Toner is replaced (default)
1: Toner near end or end
5508* CC Call CTL -
001*
Jam Remains 0: Disable, 1: Enable
Enables/disables initiating a call for an unattended paper jam.
002*
Continuous Jams 0: Disable, 1: Enable
Enables/disables initiating a call for consecutive paper jams.
003*
Continuous Door Open 0: Disable, 1: Enable
Enables/disables initiating a call when the front door remains open.
5515
SC/Alarm Setting CTL -
With @Remote in use, these SP codes can be set to issue an SC call when an SC error
occurs. If this SP is switched off, the SC call is not issued when an SC error occurs.
3. Appendix: SP Mode Tables
66
To Next Page
Loading...
