Ricoh D127 - Page 312

004
Feed Motor Reverse [ON/OFF]
Makes the paper transfer motor reverse-rotate to check ADF condition against
operational load.
009 Feed Solenoid [ON/OFF]
Makes the paper feed solenoid intermittent-drive to check ADF condition against
operational load.
011 Inverter Solenoid [ON/OFF]
Makes the inverter solenoid intermittent-drive to check ADF condition against
operational load.
6009 ADF Free Run
001
Simplex Mode [0 to 1 / 0 / 1 STEP/step]
Performs an ARDF free run at simplex scanning mode.
Press "ON" to start; press "OFF" to stop.
002
Duplex Mode [0 to 1 / 0 / 1 STEP/step]
Performs an ARDF free run in duplex scanning mode.
Press "ON" to start; press "OFF" to stop.
6017 ADF Adjustment Magnification
001
Magnification [-5 to 5 / 0 / 0.1 %/step]
Adjusts vertical magnification for ADF.
6021 ARDF Motor
001
Gain Selection [0 to 2 / 0 / 1 /step]
The values represent:
[0: Universal / 1: for GX060050 / 2: for GX060040]
6149 Max. Pre-Stack Sheet
001 [0 to 3 / 3 / 1 Sheet(s)/step]
3. Appendix: SP Mode Tables
104