Ricoh D127 - Page 324

8 191 T:Total Scan PGS
CTL
These SPs count the pages scanned by each
application that uses the scanner to scan
images.
[0 to 99999999 / 0 / 1]
8 192 C:Total Scan PGS
8 193 F:Total Scan PGS
8 195 S:Total Scan PGS
8 196 L:Total Scan PGS
The L: counters work differently case by case.
Sometimes, they count jobs/pages stored on
the document server Sometimes, they include
occasions when the user uses a file that is
already on the document server.
[0 to 99999999 / 0 / 1]
• SP 8 191 to 8 196 count the number of scanned sides of pages, not the number of physical pages.
•
These counters do not count reading user stamp data, or reading color charts to adjust color.
• Previews done with a scanner driver are not counted.
• A count is done only after all images of a job have been scanned.
• Scans made in SP mode are not counted.
Examples
• If 3 B5 pages and 1 A3 page are scanned with the scanner application but not stored, the S: count
is 4.
• If both sides of 3 A4 sheets are copied and stored to the document server using the Store File
button in the Copy mode window, the C: count is 6 and the L: count is 6.
• If both sides of 3 A4 sheets are copied but not stored, the C: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
8 201
T:LSize Scan PGS CTL [0 to 99999999 / 0 / 1]
These SPs count the total number of large pages input with the scanner for scan and
copy jobs. Large size paper (A3/DLT) scanned for fax transmission is not counted.
• These counters are displayed in the SMC Report, and in the User Tools display.
8 203
F:LSize Scan PGS CTL [0 to 99999999 / 0 / 1]
These SPs count the number of large pages scanned by original type for Fax jobs.
3. Appendix: SP Mode Tables
116