1. Remove the all strips of tape.
2.
Remove the bag, SMC, padding [A] and A3 sheet of paper [B] on the exposure glass.
3. Fold the SMC and put it in the back of the front door.
• Power supply cord is attached on the back of the main machine.
4. Open the front door [D].
5. Lift lever [E], press in on latch [F] and pull the bottle holder [G] out. (You do not need to pull it
completely out of the machine.)
6. Take a new bottle of toner, and shake it several times.
2. Installation
32
To Next Page
Loading...
