Ricoh D127 - Page 363

SP1 Mode Number Function and [Setting]
1001* 5 Scan NV Version Displays the scanner NV version.
This shows as following: Function name _ Model
name _ Version
1005* 1 Erase Margin (Remote
Scan) Range from 0 to 5
mm
Creates an erase margin for all edges of the scanned
image.
The margin color (Black or White) depends on color-
tone and invert settings.
[0 to 5 / 0mm / 1mm step]
1009* 1 Remote Scan disable Enables or disables the network TWAIN scanner
function.
[0: Enable, 1: Disable]
1010* 1 Non Display ClearLight
PDF
Sets the clear light PDF display ON/OFF
[0: OFF 1: ON]
1011* 1 Org Count Disp Sets the original counter display ON/OFF
[0: OFF 1: ON]
1012 1 User Info Release Clears or does not clear user information after a job.
[0 or 1 / 1 / - ]
0: Not clear, 1: Clear
1013 2 Scan to Media Device
Setting
Sets "Scan To Multi Media" function ON/OFF.
[0 or 1 / 1 / - ]
0: OFF, 1: ON
SP Number/Name Function and [Setting]
2
0
2
1
Compression level (grayscale)
These SP codes set the compression ratio for the grayscale or full color processing mode that can be
selected with the notch settings on the operation panel.
Range: 5 (lowest ratio) 95 (highest ratio)
1
Comp1:
5-95
(Middle I-
Qual)
[5 to 95 / 20 / 1/step]
System Service Mode
155