0 A4
0: Not selected
1: Selected
This function can keep a transmitting operation from a
destination’s incapacity error for the size limitation.
1 B4
2 A3
3 Reserved (B4)
4 Reserved (A2)
5 Reserved
6 Reserved
7 Not used Do not change the factory settings.
I-fax Switch 01 [SP No. 1-102-002]
No
FUNCTION COMMENTS
Original Line Resolution of TX
Attachment File
These settings set the maximum resolution of the original
that the destination can receive.
0 200x100 Standard
0: Not selected
1: Selected
If more than one of these three bits is set to “1”, the
higher resolution has priority. For example, if both Bit 0
and Bit 2 are set to “1” then the resolution is set for "Bit 2
200 x 400.
1 200x200 Detail
2 200x400 Fine
3 300 x 300 Reserve
4 400 x 400 Super Fine
5 600 x 600 Reserve
6 Reserve
Bit Switches
205
To Next Page
Loading...
