I-fax Switch 09 [SP No. 1-102-010]
No FUNCTION COMMENTS
0-3 Not used Do not change the settings
4-7 Restrict TX Retries
This setting determines the number of retries when
connection and transmission fails due to errors.
01-F (1-15 Hex)
I-fax Switch 0A - Not used (do not change the settings) [SP No. 1-102-011]
I-fax Switch 0B - Not used (do not change the settings) [SP No. 1-102-012]
I-fax Switch 0C - Not used (do not change the settings) [SP No. 1-102-013]
I-fax Switch 0D [SP No. 1-102-014]
No FUNCTION COMMENTS
0-1 Not used
2-3 Signature on Transmitting for Result Notification - Individual Settings
Bit SW(3,2)
(0,0): Not attached
(0,1): Setting forbidden
(0,1): Individual settings (Initial Setting)
(0,1): Attached at all times
Signature settings on result notification mail.
This function applies to the following notification mail:
•
Transmitting result notification mail
• Folder transfer result notification mail
• Receiving result notification mail
• Memory-near-full notification mail
• Job-near-full notification mail
• Memory-full notification mail
• Job-full notification mail
5. Appendix: Fax Service Program
210
To Next Page
Loading...
