4-7
Modem setting for reception
Sets the modem type for reception. The default is "0100" (V27ter, V29, V17).
Bit 7 Bit 6 Bit 5 Bit 4
0 0 0 1 V27ter
0 0 1 0 V27ter, V29
0 0 1 1
V27ter, V29, V33
(invalid)
0 1 0 0 V27ter, V29, V17
0 1 0 1 Not Used
*V34 is not supported for IP-Fax communication.
IP Fax Switch 07 [SP No. 1-111-008]
No. FUNCTION COMMENTS
0
TSI information
0: Not added, 1: Added
Adds or does not add TSI information to NSS(S).
1
DCN transmission setting at T1 timeout
0: Not transmitted,
1: Transmitted
Transmits or does not transmit DCN at T1 timeout.
2 Not used Do not change this setting.
3
Hang up setting at DIS reception
disabled
0: No hang up
1: Hang up after transmitting DCN
Sets whether the machine disconnects after DIS
reception.
4
Number of times for training
0: 1 time, 1: 2 times
Selects the number of times training is done at the
same bit rate.
5
Space CSI transmission setting at no
CSI registration
0: Not transmitted,
1: Transmitted
When "0" is selected, frame data is enabled.
When "1" is selected, the transmitted data is all
spaces.
5. Appendix: Fax Service Program
242
To Next Page
Loading...
