Ricoh D127 - Page 452

1
Setting the way to choose the method
with which FAX data communication is
done
0: The same method as the call
connection
1: Automatic setting
Sets selection way of network I/F method
Automatic setting (1) means negotiating with call
connection before determining IPv4 or IPv6.
2
Record-route using
1: Enabled
2: Disabled
“Enabled” is for Record-route acceptable SIP
server
3-4
Delay time between ACK-message
reception and re-INVITE transmitting
Set this function more than “1 sec” when SIP
connection is done via HiPath8000/4000
(Siemen Co.)
Bit 3 Bit 4
0 0 No delay
1 0 1 sec
0 1 2 sec
1 1 3 sec
5-7 Not used Do not change these settings.
IP Fax Switch 0A Not Used (do not change the settings)
IP Fax Switch 0B Not Used (do not change the settings)
IP Fax Switch 0C Not Used (do not change the settings)
IP Fax Switch 0D Not Used (do not change the settings)
5. Appendix: Fax Service Program
244