7
Designates the bits to
reference for original size of
e-mail attachments
0: Registered (Bit 0 to 6)
1: No registration.
The "0" selection (default) references the settings for Bits 00,
01, 02, 04 above. The "1" selection ignores the selections
of Bits 00, 01, 02, 04.
Switch 03 - Not used (do not change the settings)
Switch 04
No FUNCTION COMMENTS
0
Full mode address selection
0: Full mode address
1: No full mode (simple
mode)
If the other ends have the addresses, which have the full
mode function flag ("0"), this machine determines them as
full mode standard machines.
•
This machine attaches the "demand of reception
confirmation" to a message when transmitting.
• This machine updates the reception capability to the
address book when receiving.
1-7 Not used Do not change these settings.
Switch 05
No FUNCTION COMMENTS
0
Direct transmission selection
to SMTP server
0: ON
1: OFF
Allows or does not allow the direct transmission to SMTP
server.
1-7 Not used Do not change these settings.
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)
Switch 09 - Not used (do not change the settings)
5. Appendix: Fax Service Program
266
To Previous Page
Loading...
