Ricoh D5510 - Performing a Connection Test on a Shared Folder; Exporting a Shared Folder List

Performing a Connection Test on a Shared Folder
After importing the shared folder list, you can perform a connection test on the shared folder.
1. Touch , the Added Data Management icon, in Administrator Settings.
2. Touch [Connection Test] in "Shared Folder".
The connection test begins. If an error occurs during the connection test, a report will be sent to the
USB flash memory device when you touch [Output Report].
3. Touch [OK].
• You can stop a connection test while it is performed.
Exporting a Shared Folder List
1. Insert a USB flash memory device into a USB port.
Insert only one USB flash memory device.
For details about how to connect a USB flash memory device, see page 27 "Inserting a USB Flash
Memory Device".
2. Touch
, the Added Data Management icon, in Administrator Settings.
3. Touch [Export] in "Shared Folder".
When registering the contact list from the Web page of the machine, click [Download] in "Shared
Folder List".
Export of the shared folder list begins. When the export is complete, a message is displayed.
4. Touch [OK].
Managing a Shared Folder List
171